HAUG HW 150 Charging Generator
The resistance-coupled charging electrode ALW is particularly recommended for applications where an increased risk of sparking exists which could lead to damage to high-grade surfaces or electronic components. The supply to the resistance-coupled charging electrode ALW is from charging generator HW 150, which is available with either positive negative polarity. The direct voltage output of the charging generator can be set steplessly, and a remote option is also available.
Possible applications include situations where the counter-electrode required for charging is not always completely covered by the material to be charged, e.g. when two-dimensional material webs with varying widths are charged or when an uncovered gap between cut or separated materials is created on the substrate serving as counter-electrode.
 |
1. Positive or negative voltage |  |
| 2. Electrical field | ||
| 3. Insulator (e.g. film) | ||
| 4. Counter-electrode (e.g. grounded metal plate) |
Technical Data
| Dimensions | approx. 270 x 170 x 150 mm (B x H x T) |
| Protection Type | IP 30 |
| Protection class | I |
| Supply voltage | 115 VAC / 230 VAC (50 – 60 Hz) |
| HV-terminals | 1 (AG) |
| Power consumption | 30 VA |
| Output voltage | Umax = 15 kV ± 10% |
| Output voltage | (lmax) = 300 µA ± 15% |
| Signaling contacts monitoring | Contact rating max. 24 VAC / 35 VDC, max. 50 mA |
| Pulse frequency via pulse input | max. 1 Hz (max. 106 Zyklen) |
| Recovery time after overload switch-off | < 10 s |
| Operating temperature | +5 °C to +45 °C |
| Storage/transport temperature | -15 °C to +60 °C |
| Weight | 7 kg |
| Mains cable | 2,6 m; fixed to the device |
Subject to technical changes!
Variants
| Digital display |
Overcurrent | Remote control | Pulsing | Reset | Monitor- output |
|
| A | voltage and current |
switch-off | none | floating normally open contact |
floating normally open contact |
0 – 10 V |
| S | none | switch-off | 0 – 10 V | 24 VDC | 24 VDC | 0 – 10 V |
| P | none | switch-off | 4 – 20 mA | floating normally open contact |
floating normally open contact |
4 – 20 mA |
HAUG Static Control Products And Solutions For Industry