Ionized Air Blowers For Static Control From HAUG Ionization Systems
 |
Mini Air Gate LS PLE Mini air gate LS PLE – the mini unit with the maximum
effect. The midget among the HAUG air gates, it nevertheless
offers top effectiveness combined with the smallest dimensions.
Two rigidly installed ionizing bars with circular jet nozzles
guarantees the best performance. The handy unit is particularly
suitable for use with smaller machines. |
 |
Duo Air Gate LS GK The Duo air gate LS GK, together with its simultaneous dusting
of non-conductive surfaces, is a highly developed and efficient
aid in the removal of electrostatic charges.The device reduces
negative impacts on production so that quality losses, as well
as high numbers of rejects, can be almost completely eliminated.
This reduces production costs considerably. |
 |
Uno Air Gate KL GK The uno air gate KL GK is a tested and proven unit which is
used in production to eliminate electrostatic charges, dust
and associated interferences in the best possible way. The exchangeable
precision nozzles which are arranged offset in two rows shape
the air stream into a defined flat jet. Once neutralized, the
particles are mechanically removed by means of the air stream. |
 |
Compact Airlock KM GK The Compact Airlock KM GK is operated in the medium pressure
range. This technique reduces operating costs significantly,
without sacrificing effectiveness. In combination with a HAUG
Ionizing bar a good surface for subsequent coating of plastic
parts or other pre-treatment processes can archived. |
 |
Air Knife AK GK The Air Knife AK GK belongs to the group of air gates. As the name already indicates, these are ionizers which are supported by air flows. The effectiveness of the Air Knife can be explained by the special design of the air discharge nozzle which creates the so-called “coanda effect”. << Learn More >> |
 |
Needle Ionizer NI The Needle ionizer NI generates positive and negative ions.
The units assist the air stream and is intended to eliminate
electrostatic charges and contamination (e.g. dust) from small
and tiny vessels. |
 |
Ring Ionizer EI RIF Extensive trials have confirmed that the ring ionizing unit
EI RIF is the special piece of equipment for the elimination
of electrostatic charges during granular product conveying (Ring
ionizer in feed pipes). Even extremely high static charge potentials
are neutralized reliably and highly effectively. A steady, problem-free
and efficient production process is therefore guaranteed. |
 |
Ring Ionizer RI 20 / 32 / 65 The HAUG ring ionizer is a highly effective production aid
for the discharging and cleaning of surfaces – in particular
of non-conductive materials. Beside the hand-held unit, other
versions are available for installatin into plants and machinery
(without air gun). |
 |
Ionizing Air Gun "Lady Gun" RI LG The HAUG RI LG “Lady Gun” ionizing air gun has its
name with good reason: this ionizing device, with its service-friendly
handling, is a peerless innovation in the field of elimination
of dust and charges. Heavy-duty users and women greatly appreciate
is lightweight. |
 |
Accu Jet The Accu Jet is an outstanding innovation by the company HAUG
Ionization Systems: The Accu Jet represents an all-in ionization
system... |
 |
Low Pressure Ion Air Blower Ion-Air One IR1 The Ion-Air one IR1 low-pressure blower is a versatile device
for the elimination of electrostatic charges on non-conductive
material. An airflow, enriched with either positive or negative
ions, neutralizes interfering surface charges and removes –
depending on the working distance – debris from the surface.The
Ion-Air one does not need compressed air. Room air is drwan
in, filtered, accelerated by the fan, and then simultaneously
ionized and blown out again. |
 |
Ion Air Blower IB HAUG’s Ion-Air blower IB is based on the concept of a
proven ionization technique. Negative and positive ions are
added to the air flow produced by a cross-flow blower. The air
flow hence becomes conductive and is able to eliminate electrostatic
surface charges on non-conductive material. |
 |
Ion Air Blower Ion-Air Mini The HAUG air ionization blower Ion-Air mini is a small, lightweight
unit which is operated at a voltage of 24VDC. The Ion-Air mini
is supplied with a clamp which allows the unit to be fixed very
easily in the desired position, for example at a table edge.
When the clamp is removed, the Ion-Air mini can be used a handy
table-top unit. |
 |
Mini-Jet Ionizer MJ I With its air assistance, the HAUG Mini-Jet ionizer MJ I neutralizes
electrostatic surface charges highly effectively. It comes into
its own in space-critical or complex installation situations,
in particular. The air assistance allows positive and negative
ions to be conveyed over larger distances. This ion flow neutralizes
surface charges on workpieces. |
 |
Mini-Jet Ionizer MJ II With its air assistance, the HAUG Mini-Jet ionizer MJ II neutralizes
electrostatic surface charges highly effectively.It comes into
its own in space-critical or complex installation situations,
in particular. The air assistance allows positive and negative
ions to be conveyed over larger distances. This ion flow neutralizes
surface charges on workpieces. |
 |
Delta Blower DA TR Delta blower DA TR – small design – great effectiveness!
Its compact design makes the Delta blower DA TR a very versatile
device. Its wide, cone-shaped air jet blows accross the ionizing
pins which generate a vigorous ionic current with positive and
negative ions. |
 |
Mobile Circle Cleaner The Mobile Circle Cleaner is a hand-held ionizing unit. It
eliminates electrostatic charges and adhering dirt in one work
process. The Mobile Circle Cleaner is particularly effective
on textured surfaces. |
 |
Circle Cleaner CC 01 The compact surface cleaning unit Circle Cleaner CC 01 allows
electrostatic charges to be reduced or eliminated by means of
a rotating compressed air nozzles.A special variable-speed cleaning
nozzle with pulsating air flow and twin nozzle with a unique
working principle ensures, depending on the operating distance,
that disturbing surface charges and contamination are eliminated. |
 |
Web Cleaner 1 WXC 1 These Web Cleaner 1 WXC 1 are used for removing dust from surfaces.
The functional modules consist of ionization, air jet and extraction.
These modules are coordinated effectively within a closed system. |
er
 |
Web Cleaner 2 WXC 2 The Web Cleaner 2 WXC 2 is used for contact-free cleaning with
simultaneous extraction of visible dust and smaller particles.
Cleaning and elimination of electrostatic charges from material
webs in the same process by using ionized compressed air. The
integrated extractor ensures an optimum and residue-free degree
of surface cleaning. |
 |
HAUG Surface Cleaner The HAUG Surface Cleaner is intended for the contact-free removal
and cleaning of electrostatic charges and particles from, for
example, plastic injection mouldings, deep-drawn parts and film
webs. The combination of two (round) ionizing bars and pulsed
compressed air from several rotating cleaning nozzles ensures
a consistent, efficient cleaning result. |
HAUG Static Control Products And Solutions For Industry