|
Haug Static Control
|
|
|
|
Discharge Systems
|
|
|
|
Air Blowers
|
|
|
|
Air Gun
|
|
|
|
Static Blow-Off Systems
|
|
|
|
Hazardous Area
Ionizing Devices
|
|
|
|
Charging Systems
|
|
|
|
Static Measuring
& Testing Systems
|
|
|
|
|
|
Static Eliminator Bar EI-VS
 The
HAUG Static Eliminator Bar (Ionization Bar) is a powerful and strong piece of equipment. Its construction satisfies all machine construction requirements and it has proven its value
time and time again in the removal of electrostatic charges during roll, sheet and web (continuous product) processing.
Product-interfering surface charges can be removed reliably and effectively - even at high operating speeds - with a HAUG
Static Eliminator Bar (Ionization Bar) unit.
|
 |
Static Eliminator Bar EI-VS
The
HAUG Static Eliminator Bar (Ionization Bar) type EI-VS reliably removes electrostatic charges and its performance, when compared
to the standard version, is considerably enhanced.
The Static Eliminator Bar type EI-VS has all the features which characterize HAUG Ionization Bars, especially the reliable and removable contact
system, the screened high voltage cable, the absolute contact safety and special electrodes made from special steel.
|
 |
|
| |
 |
|
The electrical capacity is three times as great as that of the standard version and it therefore necessary to base any calculations
of a power pack loading on a bar length three times as long.
Example: EI-VS 50 cm with 200 cm cable
Power pack loading: 3 x 50 cm + 200 cm = 350 cm
|
|
|
|
|
Industries using this technology :
 Plastic processing industry:
Foil processing, packing machines, foil extruders etc.
Textile industry:
Weaving and spinning mills, textile finishing plants etc.
Graphic industry:
Screen and tampon printing machines, photographic and film processing machines,
folding machines etc.
Painting/spraying workshops:
Car painting/spraying, painting/spraying of plastic components etc.
|
|
|
| Accessories: |
 |
 |
|
|
|
|
Bar holders:
|
|
Technical data EI-VS:
| Diameter: |
18 mm / 20 mm |
| Bar length: |
Von 150 - 2.500 mm |
| High voltage cable: |
Standard length 2 m, permanent |
| Max. ambient temperature: |
+50°C |
| Suitable bar holder: |
Klick-Zack Order.-Nr. 10.0004.000
Bar holder Order.-Nr. 10.0301.000 |
| Ionization Bar EI-VS: |
Order.-Nr. 03.8020.000 |
TWe reserve the right to effect technical modifications!
Suitable power supply parts:
| EN-SL |
01.7780.000 (230 V) |
01.7781.000 (115 V) |
| EN-8 |
01.7757.000 (230 V) |
01.7756.000 (115 V) |
| MULTISTAT |
01.7760.000 (230 V) |
01.7759.000 (115 V) |
| EN-70 |
01.7701.000 (230 V) |
01.7700.000 (115 V) |
Max. permissible load of power supply unit:
| EN-SL |
approx. 5 m |
| EN-8 |
approx. 15 m |
| MULTISTAT |
approx. 15 m |
| EN-70 |
approx. 2 x 15 m |
|
|
|
Technical illustration:
|
|
