|
Statik-Air 08 used for contact free cleaning with simultaneous extraction of visible dust and smaller particles.
Function
 Cleaning and elimination of electrostatic charges from material webs in the same process by using ionized compressed air (fig. 2). The integrated extractor ensures and optimum and residue free degree of surface cleaning.
The following ionizing bars can be combined with the Statik Air 08 housing"
- Ionizing bar EI RN
- Ionizing bar EI RD
- Ionizing bar EI VS
 Compressed Air
Compressed air of a quality suitable for spraying applications must be avaialble, i.e. it must be free of oil and water. The upstream installation of a service unit with integrated oil and water separator is recommended.
Web Speeds
The maximum web speed of the standard version is approx. 80 m/min. Higher speeds are available upon request.
Typical Applications
Plastics, furniture, paper, print, film, foil, automotive, electrical, and other industries.
Pulsed Operation
The application of Statik Air systems in pulsed operation can be recommended for media transported with intermediat distances/gaps.
Advantage: reduced costs (e.g. for compressed air). Pulsed operation can be controlled by external input to the switchgear, e.g. using photoelectric sensors, proximity switches or other potneital free contacts.
Continuous Operation
The application of Statick Air systems in continuous operation can be recommended if the medium to be cleaned passed through continuously.
Switchgear
The switchgear is equipped with 3 functional modules:
- Power supply with power circuit breaker, motor ciruit breaker for extruder fan, ON/OFF swithc and contol lamps. should it be necessary to connect two extractor fans to one switchgear, the relevant versions can be also be supplied.
- Solenoid valve for compressed air control with time delay switch for pulsed operation.
- High voltage power pack with 4 high voltage terminals. Teh watchdog integrated in the secondary are signals a drop below the corona inception voltage.
|
